How to Calibrate Steam VR – Step-by-Step Guide with FAQs

Are you wondering how to calibrate steam VR?

Let’s look into it.

How to Calibrate Steam VR?

If SteamVR is open, go to the pop-up menu and select Developer Options. Then, under the Developer Tab, look for Quick Calibrate.

After placing your headset on the table, press the quick calibrator; it should adjust your height based on your room.

Overview of Steam VR Calibration: Room Configuration

When you’re using a VR headset, you must calibrate the space where you want to use it. This is done by measuring the distance between objects in the real world and their corresponding positions in the virtual environment.

If you don’t play VR games carefully, you may encounter obstacles while playing them, and you could get injured.

When you buy a new virtual reality (VR) headset, make sure you get one that fits comfortably into your eyes. You should also check if the lenses are clear enough so that they can see clearly what is happening around them. Also, ensure that the screen is big enough to fit your entire face.

Here is how you can complete the room configuration:

Step 1. Ensure Available Space

To experience the virtual world smoothly, you need to ensure that there is enough space for playing the games. When you start a new video gaming session, you need to decide where the boundaries of the playing area will be.

However, if you want to get rid of the hassle, implement some basic rules. These are given below:

  • Make sure that your living room has enough free floor area for experiencing the virtual world comfortably.
  • Make sure that you can move freely within the given space. That means there cannot be any obstacles within the space and no trashcans, either.

Once you’ve completed the first three steps, move on to the next one.

Step 2. Set Up Your Base Station

Base stations emit multiple beams of light to determine the location of an item within a room. They also measure the speed at which the item moves through the room.

Here is the correct way to set up your Wi-Fi router:

  • Place your base station in opposite corners of your playing area.
  • Keep the distance between the two people at least 16 feet apart.
  • If there are any barriers between them, remove them.

Besides these, make sure your bases are powered correctly and have the optimal angles required for them to function optimally.

Step 3. Wire up the Headset

Cable management is the most important thing when setting up a VR system. Here are some tips for doing so.

Here’s how you can connect the headset:

  • Connect all the orange wires with the headphones.
  • Plug the HDMI cable into your TV and the USB cable into your computer. Start up your computer.
  • Put your headset in the center of the free space.

You’re ready to begin the SteamVR experience. Connect with the Internet or enable Offline play if that option is available.

Step 4. Run Room Set up

Once you’ve set up everything so far, it’s time to start running the room setup. Before doing that, be sure to place your headphones and controllers in the middle of the free area.

To continue, follow these steps.

  • Press the power button on the bottom of your controller.
  • From your computer’s display, click on the SteamVR menu icon.
  • Select Run Room Setup from the list of options.
  • When you’re inside the Room setup menu, select “Room Scale.”

If you’ve followed the instructions correctly, you should now be able to see your controller and headset marked as green in the user interfaces. If they’re greyed out, follow the instructions and continue to the next step.

Step 5. Calibrate the Floor Level

Before measuring the distance between the two controller buttons, point either one of them at the screen. Hold down the trigger button while doing so. This will set the distance parameter in your SteamVR settings.

To calibrate the floor, follow these instructions.

  • Place the controllers at least one foot apart.
  • Click on the Calibration Floor icon on your computer.
  • Wait until a moment has passed before setting the size of the SteamVR window.

This process will set the lowest height. Do not hold the controllers over floor level.

Step 6. Calibrate Your Free Space

Once you’ve set up the roaming region, it’s ready for use.

Here’s how you can do that:

  • You can use any controller to trace the movable area.
  • Hold the trigger like you would hold a paintbrush.
  • Don’t get too close to the furniture.

Once you’ve done that, you’ll be able to see the markups on the computer interface alongside the bases, controllers, and headsets in a real-time view.

If you want to avoid stepping on anything, don’t get too close to any items you’re marking up.

Step 7. Complete the Process

Once you’ve traced out the play zone successfully, you’ll see a green border on the SteamVR interface indicating the boundaries of your play zone. If there isn’t enough room for the game, the border will turn red.

If that happens, make sure you free some space. If that isn’t possible, then relocate your entire setup to another location where you can get enough space. And start again from the beginning.

If everything goes well, Steam VR should be configured properly. Follow the instructions on the screen to finish setting up Steam VR.

To calibrate your room for SteamVR, this is by far the easiest way to go. If you’re experiencing any specific issues, read the following sections to find the solutions.

Calibrate Steam VR Eye Tracking

SteamVR Eye Trackers can be calibrated using any VR Head Set. All you need to do is plug the VR Head Set into your PC and follow these instructions.

Here’s how you can calibrate SteamVR eye tracking:

  • Put on your headphones and turn on the controllers.
  • Press the system menu on your controller.
  • Click “Pro Eye” from the VR Dashboard menu.
  • To enable the tracking of eye movements, click “Calibrate” from the menu bar at the top of
  • After centering your head, follow the line with your eyes.

After completing the eye-tracking procedure, press the system button once again to close the Steam VR Dashboards.

Calibrate the SteamVR Thumbstick Angle

SteamVR Beta allows you to change the thumb stick position by adjusting its orientation. If your thumb stick is not correctly aligned, you can use this method. Follow these instructions.

To calibrate the thumbstick, here’s how you do it:

  • Make sure you’re using an Oculus Rift headset and that the controller is connected.
  • Click Devices > Update Device…
  • Find Pair Controller in the menu system.
  • Click “Configure controller” to select which game you want to use. You’ll then be able to choose from a list of available games.
  • Once you’ve finished mapping the thumbsticks, reset the controller, so you don’t accidentally map them again.

You’ll be able to adjust the thumb stick angle by pressing the button on the side of the controller.

Conclusion

It shouldn’t be difficult for you to calibrate Steam VR. You can use the skills you already have to calibrate Steam VR.

However, if you experience difficulties calibrating the headset, please let us know by commenting below. We would be glad to assist you.

Author

  • Victor Marquez

    Victor is the Editor in Chief at Techtyche. He tests the performance and quality of new VR boxes, headsets, pedals, etc. He got promoted to the Senior Game Tester position in 2021. His past experience makes him very qualified to review gadgets, speakers, VR, games, Xbox, laptops, and more. Feel free to check out his posts.

Related Articles

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors