How Pair Controller Xbox One – Step-By-Step Guide with FAQs

This site contains affiliate links to products. We may receive a commission for purchases made through these links.

You need to sync your Series X|S or Xbox One controller. You can connect your Xbox controller to any Xbox system using the instructions given here.

Wireless controllers are useful, but setting them up can be a hassle. We’ll go over everything you need to know if you’re unsure how to connect an Xbox One or Xbox Series X|S controller to your Xbox gaming system.

So, without further ado, let’s get into it.

Quick Summary

In this article, we will talk about: 

  • How to pair controller Xbox one? 
  • Do Xbox series x|s controllers work with the Xbox One?
  • What to do if your Xbox controller is not connected? 

Without further delay, let’s get to it.

How to Pair Controller Xbox One?

Your controller must be turned on to sync. The Xbox One controllers use AA batteries, but you can also buy rechargeable battery packs for them. 

Make sure your controllers are charged before trying to pair them, as connectivity problems are frequently caused by a lack of power (or problems that seem like connectivity problems).

Step 1: Press the Xbox button in the center of the Bluetooth controller to turn it on after charging it or putting in new batteries. It will illuminate to show that it has been turned on. Then press the Xbox console’s power button.

Step 2: Enable the connection on both the Xbox One and the controller to pair them with each other. The connection button should be found first on the console. This button may be found on the left side of the original Xbox One, close to the disc tray.

Step 3: The Connection button is located below the Power button in the bottom right corner of the front of the Xbox One X and Xbox One S consoles. The white Xbox logo should begin blinking after pressing the button, signifying that the system is looking for a controller signal.

Step 4: After pressing the Xbox One’s Connect button, you have 20 seconds to give it a signal to establish a controller connection. To do this, push the black Connect button on the controller’s top side. 

While they are attempting to connect, the Xbox logo on the controller and the console will both blink. Both logos will turn solid once they’ve connected, showing that the controller and console are in sync.

Step 5: Repeat the procedure with any additional controllers you want to sync to the Xbox, up to eight.

Customize Your Controller Profile

You may observe what occurs when you turn on a controller once you’ve synced it with your console. To access the Settings menu, browse to the gear symbol after pressing the Xbox button on the controller to bring up the main menu. 

Navigate to Kinect and Devices to locate your controllers. You can configure security settings to limit who can sign in to different accounts on your Xbox, as well as which profiles, if any, each controller signs in to when you turn it on (after you’ve synced it), under the Controller menu.

Use a USB Cable

If you don’t have rechargeable battery packs for your Xbox controllers, you are not limited to using only wireless Xbox controllers. Additionally, you could use cables to connect them to your Xbox One. 

They will be synced to your console once you do this, so if you’re having difficulties synchronizing wirelessly, using a USB cord might be less complicated. You can connect your controller directly to the console by plugging a Micro-B USB cable into it. 

You won’t require batteries or a rechargeable battery pack because the now-wired controller can draw power from the cord, and the controller menu will still let you adjust the controller’s settings.

Do Xbox Series X|S Controllers Work With the Xbox One?

You may have noticed that the Xbox Series X|S controller is very similar to the Xbox One controller. Microsoft has built backward and forward compatibility right into these controllers.

This indicates that Xbox One controllers can be used with an Xbox Series X or Series S. On your Xbox One system, you can also use Xbox Series X|S controllers. 

On any platform, you can use this convenient method to play multiplayer games without having to worry about controller compatibility. You won’t lose anything by utilizing the older Xbox One controller with an Xbox Series X|S because the controllers are nearly identical. 

The dedicated share button is absent from the Xbox One controller, but gameplay may still be accomplished without it. Other than USB-C charging, the only upgrades are a better D-pad and improved grip textures.

What Should You Do If Your Xbox One Controller Isn't Connected?

What Should You Do If Your Xbox One Controller Isn’t Connected?

In most cases, following the instructions above should sync your Xbox controller and console. However, if the pairing is unsuccessful, consider the following troubleshooting tips:

  • Try changing the controller’s batteries. Make sure your controller is charged before using the Xbox One Play and Charge Kit or the Xbox Rechargeable Battery attachment. Verify that the cable you’re using to connect to the controller and charge it is in good working order.
  • When you sync the controller, keep it close to the console. If you move farther than the wireless connection between your console and controller, which has a range of around 20 to 30 feet, it might break.
  • To reduce interference, disable any additional wireless devices that are close to the Xbox and controller.
  • By pressing and holding the Xbox button on the system’s front for roughly 10 seconds, you can completely reset your console. After at least 30 seconds without using the console, unplug the power cable, reconnect it, and then turn the console back on.
  • Keep in mind that you can only have eight controllers linked to the system at once. If you have this many connected, unplug a few before adding more. Holding the Xbox button down for a few seconds or until the light on the button turns off will switch off the controller.
  • Xbox One users can easily switch between using the Xbox Series X|S controller with their Xbox and a connected Bluetooth device thanks to this capability. To move from a Bluetooth connection (such as a smartphone) back to your Xbox, quickly press the Pair button on your controller twice.

Additionally, keep in mind that your controller’s Xbox button will attempt to connect to the system it was last paired with when pressed. 

Your controller can be connected to another system as soon as you turn it on if there are other Xbox consoles nearby. You won’t be able to link it to another because of this.


As we come to an end, you might now understand how to pair controllers with Xbox One after reading this article. 

You can simply attach one end of the wire to your controller and the other to a USB port on your Xbox. Press and hold the Xbox button on the controller for a few seconds to sync them after they are connected. After the syncing is finished, you can cut the cable and use the controller wirelessly.

We hope you find this article beneficial. You can let us know if you have any difficulties or questions by leaving a comment below.


  • Victor Marquez

    Victor is the Editor in Chief at Techtyche. He tests the performance and quality of new VR boxes, headsets, pedals, etc. He got promoted to the Senior Game Tester position in 2021. His past experience makes him very qualified to review gadgets, speakers, VR, games, Xbox, laptops, and more. Feel free to check out his posts.

Related Articles

Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors