Chances are that you are also confused about which speakers are most suitable for you.
We will surely make an effort to give you some fair comparison between differently sized speakers, so you can make an informed choice.
Now, let us assess the features of two most common categories of speakers for you.
Depth and Clarity
2 Ohm Coaxial Speaker
These are powerful speakers with 360 Watts of output.
It has great depth and clarity of sound which gives it a stereo effect.
Relatively bigger, and used as an after-market choice, and you might need new pockets.
4 Ohm Pyle Speaker
The maximum expected output is about 260 Watts.
Also great, but mostly they are installed in the rear doors of cars as a supportive sound.
They can easily fit into your already present factory stereo pockets as they are smaller.
That was just a crisp comparison for you. Now, let us give you a more detailed overview of these two amazing speaker-types.
Pyle PL683BL Review - Loud and Sturdy
The Pyle PL683BL has an amazing frequency response of 70Hz – 20Khz. This means almost every music genre is going to be equally fantastic on this. The build quality is good, with a 40 oz magnet structure and neodymium film dome.
This speaker features 91dB (1w/1m) decibel sensitivity and gives you the pleasure of a smooth and immersive listening experience.
You might be surprised to know that it comes with a 1” ASV voice coil, equipping it with a high-temperature ASV voice coil. The performance and efficiency are enhanced at higher operating temperatures.
Impedance is always an important thing in a speaker, and we would always advise you to check that before you buy. Pyle has a 4-OHM impedance, which means that it will not ask for too much power from the receiver, hence giving a smoother sound.
Looks matter. Don’t they? Well, the speaker has a blue poly injection cone, which also facilitates your music to resonate.
Butyl rubber surround is meant to protect your speakers and also adds up to its durability.
Features of Pyle PL683BL
- 70 Hz to 20 kHz frequency
- 40 oz magnet structure
- 1” ASV voice coil
- 4 OHM impedance
- Butyl rubber surround
Benefits of Pyle PL683BL
Pyle can give you a very good value for money, as it will significantly enhance your listening experience. The good thing is that these speakers have a VS coil, hence no worries even if you are out in the sun. It has a range of frequency as well as a solid structure and the list goes on.
What Do the Customers Think?
More often than not, customers have complaints about their factory-fit speakers in the cars as they are not loud, have crude sound, and whatnot. That is primarily why many, probably like you, go for after-market choices. This has proved to be a great fit, making their cars even more valuable with a clear and loud sound.
Best Loud and Sturdy 6X8 Speakers
The best loud and sturdy 6X8 speakers are Pyle PL683BL because it gives you a wide frequency range as well as a great quality structure. The speakers have many other qualities that make it a compelling car audio choice.
These speakers are amazing if you are looking to compensate for the poor quality factory speaker audio in your automotive, for once and for all!
Rockford R169X2 Review - Dynamic and Lightweight
Rockford is one of the nicer choices for you, especially in such a compact size. The maximum output of 260 Watts means that these speakers will treat your ears with the clear and loud audio of your favorite music.
The speaker provides surround-sound audio, and you should not be concerned about the evenness and balance of sound. It is probably a relief for you to know that there is no need for special installation pockets. These speakers will naturally fit into replacing your factory speakers in their installation pockets.
Build quality might be a concern for you, but thankfully, these small speakers come with polypropylene cones and rubber surrounds in them.
Features of Rockford R169X2
- 260 Watts output with clean audio
- Tweeter crossover
- Polypropylene cone
- Rubber surround
- Grilles and mounting hardware included
Benefits of Rockford R169X2
The Rockford speakers are very popular, especially if you are looking for a small yet durable product. There is no need for you to go to an expert and get them fitted. They are user-friendly, lightweight and a dynamic choice for your car audio.
What Do the Customers Think?
One of the most common things you would notice customers say about Rockford is its value for money. If you are looking for something affordable after-market choice which does not disappoint you in terms of sound, perhaps it is not a bad option at all.
In case you are a bass lover, it has a quite exciting one that comes naturally for you. A lot of those who travel on highways often or in high-traffic areas as part of their routine, this high bass makes sure of uninterrupted sound.
Best Dynamic and Lightweight 5 1/4 Speakers
The best dynamic and lightweight 5 1/4 speakers are Rockford R169X2 because they are small and can easily fit into your car without any complications. They are not pricey and might very well fit into your budget. The sound of car audio is going to be much better and the pleasure of music during your journeys is worthwhile.
If you want a compact speaker with decent sound quality, it is time for you to go to Rockford. This speaker is meant more for those who are comfortable with a moderate listening experience than a very loud one. However, undoubtedly, if you are frustrated with the built-in car speakers’ and want your speakers to sound better, then Rockford is going to bring a very pleasant change for you.
6X8 VS 5 1/4 Speakers - Buyers’ Guide
There are many key features and factors that directly contribute to the overall performance of car audio speakers. The important features include audio performance, audio clarity, resistance to wear and tear, and its power-handling. Other than that, everything is on your personal preference.
Some of the important features of car audio speakers are given as follows.
The quality of rubber directly contributes to two main things. These include distortionless audio and fewer internal vibrations. You should always look for a speaker that has strong rubber lining. It will not only enhance the final audio of the speakers but also save your speakers from any sort of internal damage. Hence, indirectly increasing the longevity of the speakers for better performance.
The internal wiring of a speaker matters a lot. We would highly recommend that you get a pair of speakers which has highly-conductive copper wiring. It will not only help you get the most out of your speakers but it will also increase the longevity of your speakers. This is due to the reason that high-grade copper wire component are highly-resistant to overheating and short-circuiting. You should also look out for a good quality adapter too.
The quality of sound produced by a speaker determines your immersion with the speakers. A speaker with high-quality audio will ensure that you get to listen to every single detail in your output compared to factory speakers. Additionally, it will also contribute to mitigating the distortion in your final audio. This will help you in playing audio on bigger levels without any drop in vocal or music effects.