You need to charge your VR controllers to keep using them.
Let’s find out how.
How to Charge VR Controllers?
When there aren’t any apps running, or when the system dashboard is open, you can see the battery levels for each controller by looking at the indicator. It will display one red circle if the battery is low.
Connect each of the controllers to their respective power supplies and USB ports.
If the controller is connected to power when charging, its status light will show green if it’s turned on or white if it’s not.
Oculus Quest 2 Controllers
The Oculus Quest 2 VR Headphone has been steadily growing as an effective virtual reality device.
If you’ve been playing for a long time, you may find that your controller batteries run down unexpectedly. Because that can happen at any time, it can be pretty frustrating.
Especially because the Quest 2’s most impressive feature — hand tracking — is not available on a lot of titles, making the controllers pretty much necessary.
Can You Charge Oculus Quest 2 Controllers?
Unfortunately, you cannot use the Oculus Quest 2 controller without its own battery pack.
AA Battery
Each Quest 2 has an opening where you can insert a AAA battery into the back of the device. However, there isn’t anything visible from the outside.
If you’ve ever seen an eject symbol on your controller, then you know that the AA battery inside is Alkaline. Don’t attempt to charge it.
If you’re using an old phone, you can replace the dead battery with disposable AAA batteries.
How to Change Quest 2 Controller Batteries?
To get started, follow these instructions.
- Hold the Oculus Quest headset as shown below with the Eject button facing up.
- To remove the cartridge, slide the ejection port up and away from you.
- To remove the battery cover, first press down on the top left corner of the case until it pops up. Then pull outwards to release the battery cover.
- Remove the AA battery from the device and then put in a new one. Make sure to follow the instructions on the packaging.
- Unplug the controller and follow steps 1-3 for the other controller.
To replace the battery in an Oculus Quest 2 VR headset, just follow these simple instructions. After replacing the battery, the controller will be ready for use again.
Next time you run out of battery life, just follow these simple instructions to replace them again.
How to Check Oculus Quest 2 Controller Battery Level?
It’s always a good idea to keep an eye on the batteries when using the Oculus Quest 2 controllers.
So you can be sure you won’t get low on power during intense game sessions. Here’s how to see the battery levels of Quest 2 controllers.
- Go to the home screen of your device.
- Look at the screen. If you can’t read the text, press the Oculus buttons to bring them up.
- You’ll be able to see the current battery levels for both the Oculus Quest 2 headset and its two wireless motion controls.
The great thing is, the menu bars show the individual batteries’ levels for each controller separately so you can see which one is draining more power.
Charge Your Oculus Quest 2 Controllers with Rechargeable Batteries
Because the Quest 2 controllers use AA lithium-ion rechargeable batteries, they cannot be charged using any other type of battery. However, that doesn’t mean you can’t come up with innovative ways to power your controllers.
Charging Dock
One way to solve this problem is to use an official charging station from Anker. Luckily, Anker has a full-featured charging station that was designed specifically for the iPhone XS Max.
The dock has rechargeable lithium-ion (Li-ion) polymer battery cells and battery covers that allow for wireless charging. You can even charge the Oculus Go 2 by placing it on the docking station.
Next time, if you don’t want to open the covers, just get the Anker Quest 2 charging dock and be done with it!
How to Charge VR Controllers?
Frequently Asked Questions (FAQs)
Do Oculus controllers need charging?
Because the Quest 2 controller draws its power from AAA batteries, there’s no direct way to charge them. Once they’re depleted, you’ll need to buy new batteries to use them again.
How long does the Oculus Quest 2 controller battery last?
The Oculus Quest 2 controller has excellent battery efficiency. There isn’t a single number for the battery usage, but some people have reported they’ve used them for weeks and still had over 80 percent battery remaining.
So, there shouldn’t be any issues.
How long do VR controller batteries last?
They told us we could expect up to eight hours of battery life, but warned that this could be affected by factors such as our use of the device and the type of media we were using.
Using an app that uses heavy haptic feedback will likely drain your VR controller faster than one that doesn’t use any haptics at all.
How long do VR controllers take to charge?
On average, the charging time for the Aim controllers ranges from 1.5 to three (3) hours. Sony stated that they take one and a half (1.5) hours to fully recharge their PS VR Aim Controllers.
Why is my VR controller blinking white?
When the controller is already connected to the PC, blinks white if a button is pressed. If the controller isn’t connected to the PC, don’t blink white.
Can you leave your VR plugged in all the time?
It’s best to charge your headset overnight but not for a whole day. If you do so, it may drain its batteries too quickly and cause them to die out sooner than they would otherwise.
Can you play VR while it’s charging?
It’s not just a fiber-optics cable; it can also provide electricity to your devices. And since it works with Quest 2, it’s obvious that yes, you can use it to play games and charge at the same.
Conclusion
While the Oculus Quest2 Controler is certainly a step forward for Oculus, they are far from flawless.
They don’t support every feature available today, but they’re still necessary for most people. On the other hand, however, they lack functionality but compensate by making them easy to operate.
If you have any further questions, please leave them in the comments section.
