Buying dual speakers for your car or any vehicle can get confusing especially if you haven’t done it before. You don’t want to spend your hard-earned money on a speaker that is not suitable for your vehicle.
Thus, it’s a good idea to do some research in order to find out what’s best for you. The aspects you should look towards when buying a dual speakers are:
Build Quality
The build quality of your speakers is highly important for a couple of reasons. Firstly, the higher the build quality, the better the sound that those speakers will produce.
Speakers that are built well and from high-quality materials tend to have zero distortion even when you crank the volume all the way up.
If you have a convertible car or if you intend to install your speakers on a boat, then you should ensure that you’re getting outdoor speakers.
Outdoor speakers can be defined as speakers that are weather-resistant and will be able to consistently output sound in extreme weather conditions such as snow or rain.
There are a number of indoor/outdoor speakers that you can look towards that’ll do a great job of providing you with what you need.
Price
As with all products that you buy, you’re going to have to be mindful of how much it’s costing you.
The price will also depend on what you’re looking to achieve with your speakers.
If you just want a slight upgrade from your stock speakers, then opting for some entry to mid-level speakers that don’t cost too much would be the right move.
On the other hand, if you’re looking for high-quality audio and want to keep upgrading your system over time. Then you can go all out and get expensive speakers as long as you can afford them.
Power Handling
A speaker’s peak power handling can be defined as the amount of power it’s able to handle at any single instant.
Manufacturers tend to advertise their speaker’s peak power handling as that is usually the bigger number and high numbers look impressive in an advertisement.
However, you should know that the real value you should be looking at is the RMS rating. The RMS rating of a speaker can be defined as the amount of power it can handle over an extended period of time.
As you can probably tell, this is a more accurate measure of how much power your speaker can handle without blowing out.