If you use the Gear VR, you’ll want to be careful not to get any dirt or dust into it. It’s especially important to keep it clean if you plan on using it with others.
Fortunately, cleaning your Gear VR isn’t too difficult and won’t take long.
Without further ado, let’s get started.
How to Clean Gear VR?
Cleaning the Lenses
Cleaning your VR headset lenses is easy, even if you don’t have furry pets at home. You need to be careful not to get any dirt into them.
To clean out the lenses and avoid scratching them during the process, you should first blow up the lens using compressed air, then wipe off any dirt using a microfiber towel.
Hold a small bottle of compressed gas (such as an aerosol) close to the lens of your headset. Spray it in short and well-aimed bursts. This should remove any dirt or debris that might be stuck on or near the lens. If anything remains stuck on or around the lens, you may want to use a microfiber towel to clean it off gently.
To be safe, doing this will ensure that nothing accidentally gets into your eyes and that your glasses are clean when you’re ready to use them.
Cleaning the Face Pad
There are two main ways to keep your headphones’ ear pads clean: First, you can use a soft cloth to wipe them down regularly; second, you can use an antibacterial gel to disinfect them.
You can buy a sanitary cover for sharing your Gear VR headset with friends so that they don’t get sweaty hands when using it. However, the Gear VR head strap comes off easily because it’s just held together by velcro.
Depending on which model of Gear VR you have, there may be different size face covers attached to the headset via Velcro. However, regardless of the size, you can clean them the same. Gently pull off the cover, and use an antibacterial cleaning cloth to clean it. Then let it air dry.
After the face pad dries, you can then attach it to the inner side of the headset again. You’re ready to go!
Cleaning Outside of Gear VR
Your Gear VR is made from a hard plastic casing, so if there’s any dirt or dust stuck inside, you can easily remove it by wiping it off with a microfiber cloth. However, using antibacterial wipes is completely safe for cleaning the surface of your headset because they’re designed to kill germs.
Don’t use any items on the inner side of your Gear VR headset because you don’t need them there.
You need to wipe off your headphones to clean them. Make sure they’re completely dry before you put them back into their case.
Your Gear VR controller won’t get dusty the same way that your Gear VR will. However, it may need some cleaning from time to time.
All that it should require is being wiped off with a microfiber cleaning cloth in most cases. If something has spilled onto the controller or something stickier, you’ll want to wipe it down with an antibacterial cloth. Just ensure that the controller is powered off before you do so.
Maintaining Your Samsung Gear VR
With the Gear VR and other VR headsets, you can maintain them by following these simple steps:
- Don’t throw your Gear VR headset around.
- Always keep your camera lenses and phones covered when they’re not in use.
- If you have pets, keep them away from the headphones. If you have kids, put the headphones somewhere where they won’t be able to get at them.
- Don’t leave the headphones in extreme heat or cold temperatures.
- Be careful when handling the headset, particularly the lens adjuster and control buttons.
Storing Your Samsung Gear VR
If you plan to use your Samsung Gear VR or any other VR headset for long periods of time, you need to take care of them by keeping them clean and protected from dust and dirt. You can protect your headsets by putting them inside a protective cover when not in use.
There are VR headset case options out there, and more keep popping up every single week. Amazon offers a wide range of different types of headsets, so it’s important that you choose one that fits your needs.
So, look into finding the right storage solutions for your Gear VR or any other headset that works best for your situation and the way you use VR.
Samsung Gear VR: What Is the Best Way to Replace the Foam Cushioning of Gear VR?
Foam cushioning may naturally deteriorate over time due to normal wear and tears. Keeping your face clean by wiping off any dirt and dust regularly will extend its life.
To replace the foam padding, follow these steps:
- Remove the foam padding from the Gear VR headset.
- Align the replacement cushion with the Gear VR.
- Press the foam cushion into place.
To avoid tearing the padding, hold the padding firmly and pull out slowly.
Don’t wear the Gear VR without the included foam cushioning.
If you don’t use the foam padding, the Gear VR might not fit correctly on your head and could be uncomfortable.
Conclusion
You need to treat your Gear VR and VR headset just like any other piece of equipment. Maintain them well, clean them regularly, store them carefully, and use them for years to come.
Feel free to reach out to us in the comments below.
